Masonry repair
Sweep & inspection
Caps & crowns
Flue relining
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Olympia Chimney Fireplace Repair in Miami: What to Know First
Olympia Chimney fireplace repair in Miami typically runs between $185 and $900 depending on what’s wrong, and most jobs are completed in one visit. We’re an independent Olympia Chimney service provider, not a factory warranty center, which means we diagnose the actual problem and give you a written price before any work starts. If you own an Olympia fireplace or insert and it’s acting up, call (850) 787-8597 and we’ll talk through what you’re seeing.
This page is for Miami homeowners with Olympia gas fireplaces, wood-burning units, and inserts who want straight answers about repair costs, parts, and whether it’s worth fixing. No scare tactics. Just what we’ve learned from working on these units across Miami-Dade since 2002.
How Olympia Chimney Products Fail – and How We Fix Them
Olympia builds solid mid-range fireplace components, but Miami’s humidity and salt air create failure patterns you won’t see in drier climates. Here’s what we actually find on service calls:
- Olympia zero-clearance fireplaces: refractory panel cracking. The prefabricated firebox units Olympia supplied through the 2000s and 2010s use refractory panels that absorb moisture. In Miami’s wet season, panels that never dry out start spalling (flaking in thin sheets). We replace them with proper refractory cement panels cut to the unit’s dimensions, not generic fireplace brick.
- Olympia direct-vent gas fireplaces: pilot assembly corrosion. Direct-vent units pull combustion air from outside, and in Miami that air is salt-laden. Olympia pilot assemblies, especially on units installed within five miles of Biscayne Bay, corrode at the thermocouple connection faster than the manufacturer’s average. We replace the full pilot assembly rather than just the thermocouple, because a partial fix usually means a callback in two months.
- Olympia chimney caps and terminations: rust-through at the mesh. Olympia’s stainless caps hold up reasonably well, but the mesh screening on older caps rusts first, opening a path for birds and debris. We replace with Olympia-compatible caps or upgrade to Gelco equivalents when the original model is discontinued.
- Olympia dampers on masonry fireplaces: warped frames. The cast-iron damper frames Olympia supplied on their masonry line warp under repeated heating and cooling. You’ll hear a rattle when wind hits the chimney, or smell a faint smoke backdraft on humid nights. We shim, reseat, or replace the damper depending on how much play the frame has.
- Olympia fireplace inserts: blower motor failure. The blower motors on Olympia’s insert line run hot and often fail in their fifth or sixth year. The telltale is a hum that never becomes full-speed airflow. We swap in OEM motors when available, or a matched aftermarket motor with the same CFM rating when Olympia’s supply chain is delayed.
Styles & brands we work with





Our Olympia Chimney Fireplace Repair Process
Most Olympia repairs follow the same six-step path, and we explain each step before we do it:
- 1
You call, a person answers. Day or night. We ask what the fireplace is doing (or not doing), what model you have if you know it, and we book a window that actually works for Miami traffic.
- 2
We arrive, we look, we write the price. Before we touch a screwdriver, you get a written diagnostic and a written repair price. No “we’ll see once we open it up” pricing.
- 3
Parts call. If we need an Olympia-specific component, we check OEM availability first. If Olympia’s discontinued the part, we tell you honestly and offer a quality aftermarket alternative from a brand we trust – HeatShield for refractory work or DuraFlex liners when the venting itself needs attention.
- 4
The repair. We work clean, we work fast, and we show you the failed part when we’re done. A blower motor, a corroded pilot assembly, cracked refractory panels – you’ll see what was wrong and what we replaced.
- 5
We test it properly. Gas pressure check, draft reading, and a test burn when it’s a gas unit. If the fireplace doesn’t perform, we’re not done.
- 6
We put the guarantee in writing. Every repair gets a written guarantee. If the same repair fails within the covered period, we return at no charge. That’s the 365-Day Done Right Promise.
See the difference
Before
After
Before
After
Before
AfterWhat Olympia Chimney Fireplace Repair Costs in Miami
Here are real numbers for the Olympia jobs we see most often in Miami:
- Pilot assembly replacement on an Olympia direct-vent gas fireplace: $285 – $425
- Refractory panel replacement (one to two panels): $250 – $550 depending on panel size and whether we can match the existing part
- Blower motor replacement on an Olympia insert: $190 – $380 parts and labor
- Damper repair or replacement: $185 – $400 depending on frame condition
- Full diagnostic visit if we don’t find anything broken: $89, credited toward the repair if you choose to proceed
What moves the price: age of the unit, parts availability, and whether previous repairs used aftermarket components that don’t match the Olympia original. You’ll know the number before we start. Call (850) 787-8597 for a free phone estimate.
Why Miami Homeowners Call Ashby Chimney Miami for Olympia Chimney Work
Plenty of fireplace companies will work on an Olympia unit. What matters is whether they know what they’re looking at before they open it. Nathan Corliss, our owner and lead technician, has spent nearly three decades working chimneys and fireplaces across South Florida, from older Coral Gables estate homes to new construction in Brickell. Tell me the price first, then explain the work – everything else is just noise. That’s how we run every Olympia job.
We’re independently owned and operated under the Kingswell Guarantee, which means one standard: written price before work starts, written guarantee when it’s done, and a free second visit if the repair fails. When an Olympia part is discontinued, we lean on the other trade brands we work with daily – DuraFlex, HeatShield, and Gelco – so you’re not stuck waiting on a backordered OEM component that may never arrive. And if you call at 2 a.m. because the fireplace smell is keeping you up, a live person picks up.
FAQs
We’re an independent service provider, so we don’t process Olympia warranty claims directly. But we’ll tell you honestly if a repair is likely covered before you pay for it, and our written guarantee covers our workmanship regardless of the manufacturer’s position.
Common parts like pilot assemblies and blower motors are usually available within a few days. Older or discontinued models can take longer, and in those cases we’ll present a quality aftermarket option so you’re not waiting a month with a dead fireplace. Call (850) 787-8597 and we’ll check availability for your specific model.
If the firebox is structurally sound and the failure is a mechanical or electrical component, repair makes financial sense in most cases. We’ll tell you when repair doesn’t make sense, because we’d rather lose a job than sell you a fix that won’t last.
We schedule in real arrival windows, not “sometime between 8 and 5.” Most non-emergency Olympia repairs are seen within a few business days. If you have a gas smell or smoke backdraft, tell the person on the phone and we’ll move faster.
The Kingswell Guarantee covers the specific repair we performed for the full guarantee period stated on your invoice. If it fails within that window, we return and correct it at no charge. Simple as that.
Written by Nathan Corliss, Owner & Lead Chimney Technician, Ashby Chimney Miami at Ashby Chimney Miami, serving Miami and nearby areas.